cut faces中文

• 剪切面數

• "cut" 中文翻譯 :    vt. (cut; cutting) 1.切，割，截，斬 ...
• "face" 中文翻譯 :    n. 1.臉，面孔；面貌，樣子；面子，威信。 2.愁容， ...
• "faces" 中文翻譯 :    斧刃面; 和地方; 面數; 容顏
• "s faces" 中文翻譯 :    帕金森面容
• "a sea of faces" 中文翻譯 :    人山人海
• "all but faces" 中文翻譯 :    除了面的所有類型
• "all faces" 中文翻譯 :    所有面
• "antipodal faces" 中文翻譯 :    對映面
• "argillaceous faces" 中文翻譯 :    泥質巖相
• "asymmetric faces" 中文翻譯 :    不對稱面
• "benign faces" 中文翻譯 :    和善的面容
• "block faces" 中文翻譯 :    街區面
• "changing faces" 中文翻譯 :    千面女郎
• "chernoff faces" 中文翻譯 :    切爾諾夫臉譜圖
• "color faces" 中文翻譯 :    實體面顏色的改變
• "concave faces" 中文翻譯 :    (凹面)或場景中的; 凹面
• "copy faces" 中文翻譯 :    實體面的復制
• "create faces" 中文翻譯 :    創建面數
• "crossing faces" 中文翻譯 :    體會比交叉面
• "delete faces" 中文翻譯 :    實體面的刪除
• "distant faces" 中文翻譯 :    冷漠的容顏
• "divide faces" 中文翻譯 :    等分面數
• "edged faces" 中文翻譯 :    邊緣面片
• "equivalent faces" 中文翻譯 :    等效面
• "extrude faces" 中文翻譯 :    實體面的拉伸

• Ingot cutting face bow
  晶錠切斷面彎曲
• Curved cutting face
  刀具的曲切削面
• Main spindle of blade is manufactured by special factory , stable running and hi - precision , which can assure cutting face quality
  鋸片主軸由專業廠家生產，運轉平穩，精度高，充分保證了切削面質量。
• The bilateral - bidirectional clam has the work piece stable and the cutting face smooth without burr and dust power , and low noise and low pollution
  雙邊雙向夾鉗使工件平穩，切面平滑無毛邊、無粉塵，鋸切時低嘈音、低污染。
• The system main realized interactive rendering of 3 - d seismic data , interactive rendering of three crossed slices , interactive rendering of rand - cutting face and interactive rendering of 3 - d topography grid data
  本系統主要實現了三維地震數據體的直接交互顯示、三組正交切片的交互顯示、任意角度的切面交互顯示和三維地形網格數據的交互顯示。
• The outcome suggest that , firstly , the change of light transmission with the continuous change of parameters is periodic ; secondly , as far as the degree of effect is concerned , the light transmission of air - spaced prisms is much more sensitive to the change of the parameters than that of the glue spaced ones ; thirdly , as to the prisms glued with the same dielectric , the effect of prisms whose optical axis parallels to the glued layer is intense than those whose optical axis parallels to the plane determines by the normal of incident face and that of the cut face
  研究認為，激光偏光棱鏡的光強透射比隨各參量的連續變化都呈現出一定的周期性；各參量對空氣隙型偏光棱鏡的影響要比對膠合型棱鏡的影響大的多；同種介質膠合的棱鏡，各參量對光軸平行于切割斜面的設計類型比光軸平行于切割面的法線和入射端面的法線所組成的平面的設計類型的影響要大。
• Suggestions while all holes in the wood have been previously dealt with , sometimes during construction the wood may be damaged . in that case , wood preservative must be applied to the holes or the cutting face . all planks of wood should be joined by zinc - coated or stainless steel parts . all this increases the shole structure ` s ability to being eroded
  在可能的條件下,所有的孔洞在真空加壓處理前預先處理完成,如確需在安裝現場加工的,應使用相應的防腐劑充分涂刷所有切痕，孔洞；所有的連接件應使用鍍鋅或不銹鋼五金制品，以增強木結構工程整體的抗腐力。

• cut faces перевод